- Your cart is empty
- Continue Shopping
EN 
UK 
RU 
DE 
CS 
PL 
Single-channel time relay RV1
1905 ₴
The single-channel time relay RV1 is designed to count time intervals and automatically turn on or off executive devices at a specified frequency. Has two control buttons "Stop" and "Pause".
The single-channel time relay RV1 is designed to count time intervals and automatically turn on or off executive devices at a specified frequency.
They allow you to start and stop equipment at certain intervals, control various time processes.
The device is manufactured in a panel box and in two power modifications: from an alternating voltage network with a nominal value of 110 ... 240V and from a constant voltage source with a nominal value of 12..24V.
The device allows you to perform the following functions
- automatic counting of time intervals of a given duration;
- commutation of external electrical circuits;
- displaying the timer time on the LED digital indicator;
- light indication of operating modes;
- control of the device operation by applying external control actions (“Pause” and “Reset” buttons);
- the ability to change the parameters of the device;
- interface RS-485 protocol (ModBus RTU) (optional).
Additional Information
| Number of channels | |
|---|---|
| Dry Contact Inputs (CK) | |
| Number of outputs | |
| Output device types | |
| RS-485 interface | |
| Supply voltage, V |
Modifications
| Modifications of panel time relays | ||||||
| РВ [N1] [N2] SK / [N3] Р - RS-485 - IPх - Щ | ||||||
| RV8 - 16SK / 8R - RS-485 - IP24 - Shch | ||||||
| PB | 8 | 16SK | 8P | RS-485 | IP24 | U |
| Device type: PB- time relay |
||||||
| [N1] - number of channels 1 2 3 4 8 |
||||||
| Number and types of input sensors: [N2] - the number of dry contacts "Reset" or "Pause" (for each channel separately "Reset" and "Pause") 2 - for PB1 4 - for PB2 6 - for PB3 8 - for PB4 16 - for PB8 |
||||||
| Number of output devices: [N3] - number of P - relay 1 - for PB1 2 - for PB2 3 - for PB3 4 - for PB4 8 - for PB8 |
||||||
| PC communication interface: RS-485 - interface for controlling executive devices through the BR8 output expander for PB8 |
||||||
| Device power supply type: IPI- power supply from an alternating voltage network with a nominal value of 90 ... 240V IP24 - power supply from a constant voltage source with a nominal value of 12..24V |
||||||
| Type of shell: Shch- panel board |
||||||
You must be logged in to post a review.
Відгуки
Відгуків немає, поки що.