Eight-channel meter I8-D6

The eight-channel meter I8-D6 allows receiving and converting input signals (temperature, humidity, pressure, level, etc.) and displaying the obtained values on the built-in digital seven-segment indicator.

Purpose:

The eight-channel meter I8-D6 is designed to measure and indicate the temperature of various environments in refrigeration equipment, drying chambers, industrial / household furnaces and other technological equipment, as well as for measuring other physical quantities (level, flow, pressure, humidity, etc.) using sensors with a unified analog signal.

General functions and operating modes:

• measurement of temperature (or other physical quantities) of objects using resistance thermocouples (temperature sensors) ТСМ (50М, 100М) and ТСП (50П, 100П, Pt100, Pt500, Pt1000), thermocouples (ТХК, ТХА, ТЖК, etc.), sensors with unified output signal of current АТ (0..5 mA, 0..20 mA, 4..20 mA) and voltage АН (0..1 V, 0..5 V, 0..10 V);
• display of the measured value on the built-in LED indicator (digital temperature indicator);
• the function of calculating and indicating the square root of the measured value (for example, for measuring the instantaneous flow rate from the sensors АН and АТ);
• scaling the measurement scale (for sensors АН and АТ);
• light indication of operating modes (sensor failure, programming);
• software change of parameters of transformation characteristics (slope, offset);
• digital filtering of measurements (filter depth - up to 10 measurement periods);
• changing the indication period of the measured value;
• digital calibration of the input channel;
• programming by buttons on the front panel of the device;
• password protection of parameters;
• saving settings when the power is turned off;
• built-in power supply = 24V, 100mA for active sensors in modifications with АН and / or АТ;
• two power modifications: AC voltage network 90..240V (IPI) or constant voltage source = 12..24V (IP24);
• alarm output;
• RS-485 ModBus RTU interface (optionally, it is possible to manufacture the device with isolated RS-485).