Temperature sensors ТСМ-002p, ТСП-002p, ТХА-002p, ТХК-002p, ТЖК-002p, ТП-002p

Temperature sensors ТСМ-002p, ТСП-002p, ТХА-002p, ТХК-002p, ТЖК-002p, ТП-002p group 0 surface transducers are designed to measure the ambient temperature, liquid, gaseous and granular chemically non-aggressive media, as well as the surface of solids in various industries.

Temperature is the most common measured parameter, and overheating is one of the most negative factors in the operation of equipment, therefore, there are a huge number of ways and places of using temperature sensors.

The principle of operation of resistance thermocouples is based on a change in the electrical resistance of conductors and semiconductors depending on temperature. The material from which such a sensor is made should have a high temperature coefficient of resistance, possibly a linear dependence of resistance on temperature, good reproducibility of properties and inertness to environmental influences. To the greatest extent, platinum satisfies all of the above properties; slightly less copper.

Thermocouple Are exclusively differential temperature sensors. They generate an electrical signal proportional to the temperature difference between two different points. Therefore, the junction (junction) that we use to measure the required temperature is called the "hot" junction, while the other junction (from which we can not escape) is called the "cold" junction.

Thermal converters (temperature sensors) of group 0 are designed to measure the temperature of the environment, liquid, gaseous and bulk chemically non-aggressive media, as well as the surface of solids in various industries.

Classification of temperature sensors 202 REGMIK by type of measuring (sensing) element

• resistance thermal converters (thermometers, TS) - copper TSM (50M, 100M), platinum RTD (50P, 100P), thin-film RTD (Pt100, Pt500, Pt1000, Pt2000, Pt10000);
• thermoelectric thermocouples (thermocouples, PT) - ТХА (К), ТХК (L), ТЖК (J);
• semiconductor converters - TP (DS18B20).

Main technical characteristics of temperature sensors 202:

• CHE connection diagram - two-, three-, four-wire;
• protective reinforcement material - stainless steel 12X18H10T;
• the design of thermal converters (temperature sensors) - non-separable;
•  insulation resistance - not less than 100 megohms;
• tolerance classes - A, B, C (for TSM, TSP), 1, 2 (for THA, THC, TGK).