- Your cart is empty
- Continue Shopping
EN 
UK 
RU 
DE 
CS 
PL 
A set of resistance thermocouples (matched pair for a heat meter) KTSP-011
Price on request
The "REGMIK" enterprise manufactures sets of platinum resistance thermocouples "REGMIK KTSP- ..." (KTSP), which are a measuring transducer with high metrological characteristics.
A set of resistance thermocouples is used for converting information about the temperature and temperature difference into a change in the electrical resistance of sensitive elements as part of heat meters and other metering and control devices for thermal energy of heat supply and heat consuming organizations. KTSP can be used in systems of accounting and control of heat energy of heat supply and heat consuming organizations.
1.1.3 KTSP refers to measuring instruments that are intended for use in the field and / or outside the scope of legally regulated metrology.
| NSX type | |
|---|---|
| Mounting part diameter D, mm | |
| Mounting part length L, mm | |
| Thermal inertia index, s | |
| Working range of measured temperatures, ° С | |
| Tolerance class |
Modifications
| KTSP - 101DL Pt 100 A. 1.2 D6 L60 - 1000 G1 / 2 S24 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| KTSP | 101 | Pt100 | A | 1 | 2 | D6 | L60 | 1000 | G1 / 2 | S24 |
| Set of platinum resistance thermocouples | ||||||||||
| Modification of the KTSP: 101DS, 002DL, 101DL, 001PL, 102PL, 001, 002, 003, 011, 012, 101, 102 |
||||||||||
| NSH TSP type: Pt 100, Pt 500, Pt 1000 |
||||||||||
| Conversion tolerance class temperatures: A, B |
||||||||||
| Conversion accuracy class temperature difference: 1, 2 |
||||||||||
| Connection diagram of the RTC pins: 2 - two-wire; 4 - four-wire |
||||||||||
| Mounting part diameter, D, mm according to the dimensional drawing | ||||||||||
| Mounting part length, L, mm: according to the dimensional drawing | ||||||||||
| Lead length, Lв, mm: according to the dimensional drawing | ||||||||||
| Connection thread type: according to the dimensional drawing | ||||||||||
| Union nut size, mm: according to the dimensional drawing | ||||||||||
| Specify the length of the pins only for modifications: 101DS, 101DL, 102PL, 101, 102. The dimensions of the union and the nut should be indicated only for modifications: 002, 003, 012, 101,101 DS, 002 DL, 101 DL |
||||||||||
Download
Passport for "REGMIK KTSP" (83.8 KB)
Operation manual "REGMIK KTSP" (266 KB)
Certificate of conformity type "REGMIK KTSP" (3.56 MB)
Certificate of conformity type "REGMIK KTSP" (12.1 MB)
You must be logged in to post a review.
Відгуки
Відгуків немає, поки що.