Sixteen-channel meter I16-D6

Sixteen-channel meter I16-D6 allows receiving and converting input signals (temperature, humidity, pressure, level, etc.) and displaying the obtained values on the built-in digital seven-segment indicator.

Purpose:

Sixteen-channel meter I16-D6 is designed to work with sensors with a unified current signal and can be used as an analog input expansion unit.

General functions and operating modes:

• measurement using sensors with a unified AT current output signal (0..5 mA, 0..20 mA, 4..20 mA);
• display of the measured value on the built-in LED indicator (digital indicator of a physical quantity);
• the function of calculating and indicating the square root of the measured value (for example, for measuring the instantaneous flow rate from AT sensors);
• scaling of the scale of measurements;
• light indication of operating modes (sensor failure, programming);
• software change of parameters of transformation characteristics (slope, offset);
• digital filtering of measurements (filter depth - up to 10 measurement periods);
• changing the indication period of the measured value;
• digital calibration of the input channel;
• programming by buttons on the front panel of the device;
• password protection of parameters;
• saving settings when the power is turned off;
• built-in power supply = 24V, 100mA for active sensors in modifications with АН and / or АТ;
• two power modifications: AC voltage network 90..240V (IPI) or constant voltage source = 12..24V (IP24);
• alarm output;
• RS-485 ModBus RTU interface (optionally, it is possible to manufacture the device with isolated RS-485).