- Your cart is empty
- Continue Shopping
EN 
UK 
RU 
DE 
CS 
PL 
Two-channel meter I2-01
3500 ₴
DISCONTINUED FROM PRODUCTION !!!
Replacement - RP2-U
Two-channel meter / indicator with alarm output. Standard sensors ТС, ПТ, АН, АТ can be used as input sensors.
The two-channel meter I2-01 has an alarm output and is designed to receive and convert one or two input analog signals into physical values (temperature, humidity, pressure, level, etc.) and display the obtained values on a built-in digital indicator.
The meter has two independent measuring channels and the possibility of execution in two modifications for power supply: AC voltage network 90..240V (IPI) or DC voltage source = 12..24V (IP24).
It is also possible to manufacture a device with two indicators for the simultaneous display of measured values in two channels.
- measurement of temperature (or other physical quantities) of objects using resistance thermocouples (temperature sensors) ТСМ (50М, 100М) and ТСП (50П, 100П, Pt100, Pt500, Pt1000), thermocouples (ТХК, ТХА, ТЖК, etc.), sensors with unified output signal of current АТ (0..5 mA, 0..20 mA, 4..20 mA) and voltage АН (0..1 V, 0..5 V, 0..10 V);
- display of measured values on the built-in LED indicator (digital two-channel temperature indicator);
- calculations and indication on the second channel of the mathematical function of two measured values (sum, difference, average, minimum, maximum);
- calculations and indication of the second humidity channel by the psychrometric method (T1-dry, T2-wet);
- the function of calculating and indicating the square root of the measured value (for example, for measuring the instantaneous flow rate from the sensors АН and АТ);
- scaling the measurement scale (for sensors АН and АТ);
- light indication of operating modes (sensor failure, programming);
- software change of parameters of transformation characteristics (slope, offset);
- digital filtering of measurements (filter depth - up to 10 measurement periods);
- digital calibration of input channels;
- changing the indication period of the measured value;
- programming by buttons on the front panel of the device;
- password protection of parameters;
- saving settings when the power is turned off;
- built-in power supply = 24V, 100mA for active sensors in modifications with АН and / or АТ;
- RS-485 Modbus RTU interface (optional).
Additional Information
| Number of channels | |
|---|---|
| Input sensor types | 0..1V, 0..10V, 0..5V, 0..5mA, 0..20mA, 4..20mA, THC, THA, TJK, TPP10, TPR, TVR, TSM 50M, 100M, TSP 50P, 100P, TSP Pt100, 500, 1000, UI (TS + PT + AN + AT) |
| Number of outputs | |
| Output device types | |
| RS-485 interface | |
| Number of indicators | |
| Supply voltage, V |
Download
Modifications
| I [N1] -01 [N2] TS, [N3] PT, [N4] ANx, [N5] ATx / [N6] OK, [N7] P, [N8] OS-2I-RS-485 - IPx - Shch | ||||||||
| I2 - 2TS-2I- RS-485 - IPI - Shch | ||||||||
| AND | 2 | 2TC | 2I | RS-485 | IPI | U | ||
| Device type: I-meter |
||||||||
| [N1] - number of measurement channels: 1, 2, 4, 8, | ||||||||
| 01- alarm output in a two-channel meter |
||||||||
| Number and types of input sensors: [N2] - number of vehicles [N3] - number of PTs [N4] - number of sensors with AN (AH1 - from 0 to 1 V; AH2 - from 0 to 10 V; AH3 - from 0 to 5 V) [N5] - number of sensors with AT (AT1 - from 0 to 5 mA; AT2 - from 0 to 20 mA; AT3 - from 4 to 20 mA) |
||||||||
| Number and types of output devices: [N6] - number of OK - collector openings [N7] - number of P - relay [N8] - number of OS - optosimistor |
||||||||
| Number of indicators: 2I- 2 four-digit seven-segment indicators |
||||||||
| PC communication interface: RS-485 |
||||||||
| Device power supply type: IPI - power supply from an alternating voltage network with a nominal value of 90 ... 240V IP24 - power supply from a constant voltage source with a nominal value of 12..24V |
||||||||
| Type of shell: Shch- panel board |
||||||||
You must be logged in to post a review.
Відгуки
Відгуків немає, поки що.