Temperature sensors TSM-101p, TSP-101p, THA-101p, THK-101p, TJK-101p, TP-101p

Temperature sensors TSM-101p, TSP-101p, THA-101p, THK-101p, TJK-101p, TP-101p of group 1 are designed to measure the temperature of the environment, liquid, gaseous and free-flowing chemically non-aggressive media, as well as the surface of solids in various industries.

Temperature is the most common measured parameter, and overheating is one of the most negative factors in the operation of equipment, therefore, there are a huge number of ways and places of using temperature sensors.

The principle of operation of resistance thermocouples is based on a change in the electrical resistance of conductors and semiconductors depending on temperature. The material from which such a sensor is made should have a high temperature coefficient of resistance, possibly a linear dependence of resistance on temperature, good reproducibility of properties and inertness to environmental influences. To the greatest extent, platinum satisfies all of the above properties; slightly less copper.

Thermocouple Are exclusively differential temperature sensors. They generate an electrical signal proportional to the temperature difference between two different points. Therefore, the junction (junction) that we use to measure the required temperature is called the "hot" junction, while the other junction (from which we can not escape) is called the "cold" junction.

Classification of temperature sensors 101p REGMIK by the type of measuring (sensing) element

• resistance thermocouples (thermometers):
  • resistance thermocouples TSM-101p (TSM sensor);
  • resistance thermocouples TSP-101p (TSP sensor).
• thermoelectric thermocouples (thermocouples):
  • thermocouples TXA-101p;
  • thermocouples ТХК-101п;
  • thermocouple TJK-101p.
• semiconductor converters - TP-101p.

Main technical characteristics of temperature sensors TSM-101p, TSP-101p, TXA-101p, TXK-101p, TZHK-101p, TP-101p

• Tolerance classes - A, B, C (for vehicle), 1, 2 (for TP);
• The connection diagram of the SE is two-, three-, four-wire;
• by type of SE are divided into:
  • resistance thermocouples - TSM-101p (50M, 100M), TSP-101p (50P, 100P, Pt100, Pt500, Pt1000, Pt2000, Pt10000),
  • thermoelectric converters (thermocouples) - TXA-101p (K), TXK-101p (L), TZHK-101p,
  • semiconductor - TP-101p (DS18B20);
• Protective reinforcement material - steel 12X18H10T;
• Dust and water protection degree - IP54;
• Thermal converters design - non-separable;
• Insulation resistance - not less than 100 megohms.

Temperature sensors can be made according to individual customer requirements.
You may be interested in temperature sensors similar in parameters TSM-101, TSP-101, THA-101, THK-101, TJK-101, TP-101. Their main difference from modification 101p is the absence of a spring between the flange and the fitting.